ClearOne Converge Pro - Manual (Page 215)

Appendix A: Serial Commands 211
aconnlvl – Audible Connect / Disconnect Level
This command selects/reports the audible connect / disconnect indicator’s level.
Command Form : DEVICE aconnlvl [Value]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 17 (r)
Value Signed Float 2 -12.00 – 12.00
(null to query in text) dB
ad – Auto Disconnect Enable / Disable
This command selects/reports the setting of auto disconnect.
Command Form : DEVICE ad [Value]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 17 (r)
Value unsigned integer 2 0 = off
1 = loop drop
2 = Call progress
3 = loop drop + Call progress
(null to query in text)
adclip – Audio Clipping
This command reports the channels that are currently clipping their audio signals. This command is read only.
This command is implemented only for inputs.
Command Form : DEVICE adclip [Values]
argument Type size values
Value Bit map of
inputs 2 xxxx xxxx xxxx xxxx
|……………………| input 1 (lsb) to 12 (msb)
|…….| reserved
(null to query in text)
Bit map of
outputs 2 xxxx xxxx xxxx xxxx
|………………………| output 1 (lsb) to 13 (msb)
|….| reserved
Bit map of
processors 2 xxxx xxxx xxxx xxxx
|……………| processor A (lsb) to H (msb)
|--------------| reserved
Bit map of
Faders 1 xxxx xxxx
|------| Faders 1 (lsb) to 4 (msb)
|-------| reserved
Bit map of Telco 1 xxxx xxxx
| Telco rx
| Telco Tx
|-----------| reserved