ClearOne Converge Pro - Manual (Page 229)

Appendix A: Serial Commands 225
GRpsel – Gating Group Select
This command selects/reports which Gating Group a microphone input is assigned.
Command Form : DEVICE GRpsel [Value]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 3 (m)
Value Channel 2 See 4 (G) in Groups and channels
(null to query in text)
hooK – Hook Flash
This command sends a hook flash. There is no query for this command.
Command Form : DEVICE hooK
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 17 (r)
reserved 2 0
hooKd – Hook Flash Duration
This command selects/reports the hook flash duration.
Command Form : DEVICE hooKd [Value]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 17 (r)
Value unsigned integer 2 50 – 2000
(multiples of 10 ms only)
(null to query in text) ms
label – Label
This selects/reports the label of the specific channel or the unit.
Command Form : DEVICE label [in/out] [Value]
argument Type size values
Channel Channel 1 See Groups and channels
Group Group 1 1, 2, 3, 4, 5, 6, 7, 8, 12, 13, 14, 16, 17, 20
(i, o, m, G, p, e, l, A, F, S, C, T, r, B)
input / output to
matrix unsigned integer 2 Groups all but 6 0
Groups 6 0 = output
1 = input
label String 20 1 – 20 characters
CleAr = clear the label
(null to query in text)
lcdconTRasT – LCD Contrast
This command selects/reports the lCd Contrast Setting.
Command Form : DEVICE lcdconTRasT [Value]
argument Type size values Units
Value unsigned integer 4 0 (lightest) – 63 (darkest)
(null to query in text)