ClearOne Converge Pro - Manual (Page 241)

Appendix A: Serial Commands 237
Group Group 1 20 (B)
Value reference output 2 0 = none
See 2 (o) in Groups and channels
(null to query in text)
ReseT – Reset
resets the unit. There is no query for this command.
Command Form : DEVICE ReseT
no arguments
RinG – Ring Indication
This command indicates a ringing line. This command is reportable only. it cannot be queried or set.
Command Form : DEVICE RinG
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 17 (r)
Value unsigned
integer 2 0 = ring Cycle ended
1 = ring Cycle Started
RinGeRen – Audible Ring Enable
This command sends/reports the use of an audible ring.
Command Form : DEVICE RinGeRen [Value]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 17 (r)
Value unsigned integer 2 0 = off
1 = on
2 = Toggle
(null to query in text)
RinGeRlvl – Audible Ring Level
This command selects/reports the audible ring’s level.
Command Form : DEVICE RinGeRlvl [Value]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 17 (r)
Value Signed Float 2 -12.00 – 12.00 (dB)
(null to query in text)
RinGeRsel – Audible Ring Melody Selection
This command sends/reports the audible ring melody.
Command Form : DEVICE RinGeRsel [Value]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 17 (r)
Value unsigned integer 2 1 – 3
(null to query in text)