ClearOne Converge Pro - Manual (Page 224)

220 Technical Services: 800-283-5936
eneTdhcp – Ethernet DHCP Selection
This command selects/reports the use of dHCp of the ethernet port on the unit.
Command Form : DEVICE eneTdhcp [Value]
argument Type size values Units
Value unsigned integer 4 0 = off
1 = on
2 = Toggle
(null to query in text)
eneTdns – Ethernet DNS Selection
This command selects/reports the use of dnS of the ethernet port on the unit.
Command Form : DEVICE eneTdns [Value]
argument Type size values Units
Value unsigned integer 4 0 = off
1 = on
2 = Toggle
(null to query in text)
eneTdnsa – Ethernet DNS Server Address
This command selects/reports the dnS server ip address of the ethernet port on the unit.
Command Form : DEVICE eneTdnsa [Value]
argument Type size values Units
Value ip Address 4 (null to query in text)
eneTdnsa2 – Ethernet DNS Server Address 2
This command selects/reports the alternate dnS server ip address of the ethernet port on the unit.
Command Form : DEVICE eneTdnsa2 [Value]
argument Type size values Units
Value ip Address 4 (null to query in text)
eneTdomain – Ethernet Domain Argument
This command selects/reports the domain Argument of the ethernet port on the unit.
Command Form : DEVICE eneTdomain [Value]
argument Type size values Units
Value String 64 (null to query in text)
eneTGaTe – Ethernet Default Gateway Address
This command selects/reports the default gateway of the ethernet port on the unit.
Command Form : DEVICE eneTGaTe [Value]
argument Type size values Units
Value ip Address 4 (null to query in text)