ClearOne Converge Pro User Manual
Page 232
228 Technical Services: 800-283-5936
loGmasK – Device Log Mask
This command sets or reports the device event log mask.
Command Form
: DEVICE loGmasK [Value]
argument Type
size
values
Units
Value
Hexadecimal
4
x x x x x x x x x x x x x x x x
| | | | | | | | | | | | | | | | reset
| | | | | | | | | | | | | | | errors
| | | | | | | | | | | | | | password Access
| | | | | | | | | | | | | Telco on/off
| | | | | | | | | | | | dial
| | | | | | | | | | | Call duration
| | | | | | | | | | System Checks
| | | | | | | | | (reserved)
| | | | | | | | (reserved)
| | | | | | | default
(null to query in text)
lvl – Level
This command reports the level of a channel. This command is read only.
Command Form
: DEVICE lvl
argument Type
size
values
Units
Channel
Channel
1
See Groups and channels
Group
Group
1
1, 2, 3, 5, 7, 12, 16, 17, 20
(i, o, m, p, l, F, T, r, B)
position
meter Type
2
See meter Type definitions
Value
Signed Float
4
-99.99 – 99.99
(Sent with null in text, Value returned)
dB
lvlRepoRT – Level Report
This command selects/reports the status of level reporting for the specified channel.
Command Form
: DEVICE lvlRepoRT
argument Type
size
values
Units
Channel
Channel
1
See Groups and channels
Group
Group
1
1, 2, 3, 5, 7, 12, 16, 17
(i, o, m, p, l, F, T, r)
position
meter Type
2
See meter Type definitions
Value
unsigned integer
4
0 = off (delete from list being reported)
1 = on (Add to list being reported)
2 = Toggle
(null to query in text)
lvlRepoRTen – Level Report Enable
enables level reporting for the unit.
Command Form
: DEVICE lvlRepoRTen [Value]
argument Type
size
values
Units
Value
unsigned integer
4
0 = Turn off reporting but leave current list
1 = Turn on reporting
2 = Turn off reporting and clear the list
(null to query in text)