ClearOne Converge Pro - Manual (Page 221)

Appendix A: Serial Commands 217
deFaUlT – Default The Unit
Sets the unit to factory defaults. There is no query for this command.
Command Form : DEVICE deFaUlT
no arguments
delay – Delay Adjust
This command selects/reports the setting of delay time.
Command Form : DEVICE delay [Value]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 5 (p)
Value unsigned Float 2 0.00 – 250.00
(null to query in text) ms
delaysel – Delay Select
This command selects/reports the delay activation of an assignable processing channel.
Command Form : DEVICE delaysel [Value]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 5 (p)
Value unsigned integer 2 0 = off
1 = on
2 = Toggle
(null to query in text)
devicename – Argument Identification Label
This selects/reports the device Argument identification label of the specific channel.
CommanD Form : DEVICE devicename [Value]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 1, 2, 3, 7
(i, o, m, l)
reserved unsigned integer 2 0
label String 12 1 – 12 characters
CleAr = clear the label
(null to query in text)
devicesUbType – Sets the Subtype of a Connected Device
This command enables/disables or reports the current type of device connected to an input or output.
Command Form : DEVICE devicesUbType [Value]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 1, 2, 3, 7 (i, o, m, l)
Value unsigned integer 2 (null to query in text)