ClearOne Converge Pro - Manual (Page 237)

Appendix A: Serial Commands 233
nom – Number of Open Microphones Mode
This command selects/reports the setting of number of open microphones (nom) on output channels.
Command Form : DEVICE nom [Value]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 2, 16 (o, T)
Value unsigned integer 2 0 = off
1 = on
2 = Toggle
(null to query in text)
nTpsRv – NTP Network Time Server Address
This command selects/reports the ip addresses of the nTp Time Server the unit’s nTp client requests time status
from.
Command Form : DEVICE nTpsRv [Value 1 Value 2]
argument Type size values Units
Value 1 ip Address 4 (null to query in text)
Value 2 ip Address 4
nUll – Null the Telephone Line
This command nulls the telephone line. There is no query for this command.
Command Form : DEVICE nUll
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 17 (r)
reserved 2 0
oFFa – Off Attenuation Mode
This command selects/reports the off attenuation value of a mic channel.
Command Form : DEVICE oFFa [Value]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 3 (m)
Value unsigned
Float 2 0.00 – 60.00
(null to query in text)
paa – PA Adaptive Mode
This command selects/reports pA adaptive mode for the specified mic.
Command Form : DEVICE paa [Value]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 3 (m)
Value unsigned integer 2 0 = off
1 = on
2 = Toggle
(null to query in text)