ClearOne Converge Pro - Manual (Page 239)

Appendix A: Serial Commands 235
pp – Phantom Power
This command selects/reports the setting of phantom power.
Command Form : DEVICE pp [Value]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 3 (m)
Value unsigned integer 2 0 = off
1 = on
2 = Toggle
(null to query in text)
pReseT – Preset Execution/Reporting
This command selects/reports the state of a preset.
Command Form : DEVICE pReseT [Value]
argument Type size values Units
Channel Channel 1 0 (Binary)/null (Text) = Query last preset ran
See Groups and channels
Group Group 1 13 (S)
Value unsigned integer 2 0 = Set preset state to off
1 = Set state to on and execute if not already on
2 = execute and return state to off
(null to query current state in text)
pRGsTRinG – Program String
This command sets/reports a programmed string.
CommanD Form : DEVICE pRGsTRinG [Value]
argument Type size values Units
id unsigned integer 4 0 – 7
Value String 80 CleAr = Clear current value
1 – 80 Chars
(null to query in text)
Special Characters:
\a = alert
\b = backspace
\f = form feed
\n = new line
\r = carriage return
\t = horizontal tab
\v = vertical tab
\\ = backslash
pTTThReshold – Push to Talk Threshold
This command selects/reports the setting of the push to talk threshold for a microphone.
Command Form : DEVICE pTTThReshold [Value]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 3 (m)
Value Float 2 -100 to 0
(null to query in text) dB