ClearOne Converge Pro - Manual (Page 206)

202 Technical Services: 800-283-5936
seRial command sUppoRT Table
The following table shows serial command support by Converge/Converge pro device type. note that telco-related
commands only work on models that have telephone interfaces (Converge pro 880T, 840T, TH20); and AeC and
nC-related commands do not work with Converge Sr 1212.
Command name
Converge
pro 880
Converge
pro 880T
Converge
pro 840T
Converge
pro 8i
Converge
pro TH20
Converge
Sr 1212
AA x x x
AAmB x x x x x
AArinGS x x x
AConn x x x
AConnlVl x x x
Ad x x x
AdClip x x x x x x
AdpreSenT x x x x x x
AeC x x x x
AGC x x x x x x
AGCSeT x x x x x x
AmBlVl x x x x x
AmxdueT x x x x x x
AudiomASTer x x x x x x
BAud x x x x x x
CAlldur x x x
CAllerid x x x
CGroup x x x x x
CHAiro x x x x x
CleAreFFeCT x x x
CloCK x x x x x x
CompreSS x x x x x
CompSel x x x x x
CounTrY x x x
CTrlmASTer x x x x x x
deCAY x x x x x
deFAulT x x x x x x
delAY x x x x x
delAYSel x x x x x
deViCenAme x x x x x x
deViCeSuBTYpe x x x x x x
deViCeTYpe x x x x x x
dFlTm x x x x x x
diAl x x x
did x x x x x x
dSpVer x x x x x x
dTmFlVl x x x
dTonelVl x x x
dupdATe x x x x x x