ClearOne Converge Pro - Manual (Page 244)

240 Technical Services: 800-283-5936
siGToUT – Signal Generator Time Out
Sets the signal generator time out for the unit.
Command Form : DEVICE siGToUT [Value]
argument Type size values Units
Value unsigned integer 4 0 = disable
1 – 30
(null to query in text) min
slvl – Speech Level Control
This command selects/reports the setting of Speech level Control.
Command Form : DEVICE slvl [Value]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 3 (m)
Value unsigned integer 2 0 = off
1 = on
2 = Toggle
(null to query in text)
smTpsRv – SMTP Mail Server Address
This command selects/reports the ip address of the SmTp mail server, and the email Address the unit’s SmTp client
sends messages to.
Command Form : DEVICE smTpsRv [Value Address]
argument Type size values Units
Value ip Address 4 (null to query in text)
(0.0.0.0 Clears ip and String)
Address String 40 1 – 40 characters
(null to query in text)
snmpmnGRip – SNMP Manager Host IP Address
This command selects/reports the ip address of the Snmp manager.
Command Form : DEVICE snmpmnGRip [Value]
argument Type size values Units
Value ip Address 4 ip Address of Snmp manager to send Traps to
(null to query in text)
snmpmnGRpoRT – SNMP Manager Notification Port
This command selects/reports the Snmp Trap port for Snmp manager.
Command Form : DEVICE snmpmnGRpoRT [Value]
argument Type size values Units
Value unsigned integer 4 1-255
(null to query in text)
snmpReadcomm – SNMP Read Community String
This command selects/reports the Snmp read community string.
Command Form : DEVICE snmpReadcomm [Value]
argument Type size values Units
Value String 30 read Community validation string (GeT data)
(null to query in text: defaults to “public”)