Unitec Sierra Management System - Manual (Page 62)

Sierra Programming Reference Manual 52
Click Edit in the POS Interface table.
Note: You may also restart the POS connection from this page.
Figure 63. POS Interface Configuration
1. Select the code length from the drop down menu. Your options are 5, 6 or 7 digits.
2. Enter the Expiration period, from 00 to 99 days. The factory default setting is 00, which disables
code expiration.
3. Select either POS1 or POS2 for the POS interface protocol from the drop down menu. Consult C-
Store POS manufacturer for proper setting.
4. Select either 1200, 2400. 4800, 9600, or 19200 for the Baud Rate of the register/pump interface
from the drop down menu. Consult C-Store POS manufacturer for proper setting.
5. Select whether you want the entry unit to send code expiration and wash status to the C-Store
register.
6. Select whether you want the entry unit to use hardware handshaking when communicating with
the C-store POS register.
7. Click on Feature Map.