Unitec Sierra Management System - Manual (Page 47)

Sierra Programming Reference Manual 37
Any added services that will be offered at the entry units using this profile must be listed and configured
here. To add a new added service, select the service from the drop down menu at the top of the screen and
click the Add to List button. Click the Product Settings button next to the service to configure the service. If
you wish to delete an existing Added Service, click the Remove from List button.
Figure 39. Wash Select II Added Services Settings Screen
1. Enter any additional information about the added service, if you wish. This field is limited to 16
characters.
2. Click Save to return to the main Added Services page and then Next to proceed to the Wash
Dispensing page.
Figure 40. Wash Select II Wash Dispensing Screen
Click the Product Settings button next to the wash name to configure the wash. To delete an existing wash
package, click the Remove from List button. To change the order of the washes displayed, press the arrow
keys to move the wash up or down in the list. For the Wash Select II, the order that washes are displayed
will match the wash order shown in the windows (from top to bottom). NOTE: If you change the order of
the wash packages, you must change the wash relay patterns at the Wash Select II to match the new order.