Unitec Sierra Management System - Manual (Page 16)

Sierra Programming Reference Manual 6

Site Lynx – for sites using multi-site management
8. If you would like the system to automatically reboot every day, click Enable and choose a time. The
default is set to 3:00AM.
9. For Notifications, enter the From email address. This is the email address that will be displayed in
alert notifications sent via e-mail. Enter the event list size, in days. This will store events in the Events
section for the selected number of days.
3.1.1 Server Parameters:
If you have an External Server, Remote Code POS4000 or are using Site Lynx multi-site management,
you will need to configure server parameters.
3 . 1 . 1 . 1 E x t e r n a l S e r v e r S e t t i n g s
If you will be using an external server (WashSoft, Auto Pilot, etc.), select External Server.
Figure 5. External Server POS Code Settings
If you will be using an external server to generate POS codes, select External and click Save. No further
configuration is necessary. If you are using an external server AND a Remote POS4000 to create POS codes,
select Standard and click Save, then configure the Remote POS4000 setting in the Standard Server screen,
as follows.