Introduction, Figure 1. sierra login screen, 1 introduction – Unitec Sierra Management System User Manual
Page 11
Sierra Programming Reference Manual
1
1 Introduction
The Sierra Management Application (or Sierra Server) is a software program that’s used by Unitec’s Portal
Ti, C-Start, Sentinel, WashPay, and the Wash Select II with WashPay integration. It includes a management
application that is used for programming the system operating parameters, viewing and printing reports,
and managing house accounts and car wash promotions. This document includes step-by-step instructions
for their use.
A PC with a standard Internet browser is required to access the Sierra Management Application. The PC can
be located either on-site or off-site. The entry system unit’s Installation Manual provides guidelines for
connecting a PC to the local site network.
To access the management application, type the following into the address bar:
(where XXX equals your site IP address).
When a connection to the server is established, the login page should appear (as shown below). At initial
startup, you will use the Owner user account (user ID 00, password 00).
Figure 1. Sierra Login Screen
Due to PCI compliance, once you login the first time using an administrative password, you will
immediately be prompted to change your password to a more secure password that is at least 7
characters long and contains both letters and numbers, as shown below.