Unitec Sierra Management System - Manual (Page 34)

Sierra Programming Reference Manual 24
3.3.2 Operating Schedule
Figure 22. Operating Schedule Screen
The Operating schedule is used to automatically take the Portal or Sentinel out of service when the site is
closed. The message that’s displayed in this out of service condition is programmed through the User
Interface set-up page. This feature is designed to allow the operating hours to vary by day of the week. The
default setting is ‘Always Open’ (no schedule is applied).
To setup the site Operating Schedule, change operating mode from Always Open to Use Operating
Schedule. With Use Operating Schedule selected, click the box next to each day the site will be open, and
select the opening and closing times from the drop-down menus. If you wish to keep your wash bay open
overnight, make sure your open and close times are set to different days. Click Next to proceed to the Added
Services Dispensing page.