Metrohm 714 IC Metrodata - Manual (Page 8)

2 Installation
IC Metrodata for Win95
2
2 Installation
Protection against static charges
Electronic components are sensitive to static charging and can be
destroyed by discharges. Before you touch the PC board or any of
the components inside the PC, you should earth yourself and any
tools you are using by touching an earthed object (e.g. housing of
the instrument or a radiator) to eliminate any static charges which
exist.
2.1 Hardware installation
The hardware installation comprises the installation of 1 or 2 PC boards
in a free PC slot, the installation of the dongle in a LPT port and the
connection of the PC board to 732 IC Detector and 733 IC Separation
Center. Proceed as follows:
Installation of 1 st PC Board (1.714.0310)
1) Switch off PC and disconnect power cable from the power socket.
2) Disconnect all other cables to computer peripherals (keyboard,
display, printer, etc.).
3) Check 1.714.0310 PC Board: the two jumpers at position 4 and 6
have to be installed.
4
5
6
8
4) Disassemble PC and install 1.714.0310 PC Board in a free slot
(see instruction manual of the PC).
5) Reassemble PC.