Metrohm 714 IC Metrodata - Manual (Page 7)

1.1 General information
IC Metrodata for Win95
1
1 Introduction
1.1 General information
« IC Metrodata for Win95», the new evaluation tool consisting of the
1.714.0310 PC Board, the 6.2145.010 Dongle and the 6.6027.153
Software, is a versatile integrator system for all chromatographic meth-
ods, especially ion chromatography. The evaluation software is based
on Windows 95 ® and supports the corresponding functions such as
multitasking and easy export of data to other Windows applications.
«
IC Metrodata for Win95» offers the following possibilities:
Hardware
• 1.714.0310 PC Board for analog/digital conversion with a resolution
of 24 bit and a voltage range of ± 2.5 V, data acquisition rate up to
60 points/s.
• Two entry channels that can be used simultaneously or independ-
ently from each other.
Software
• Data acquisition via methods that contain the corresponding acqui-
sition and evaluation parameters, either with the 1.714.0310 PC
Board or with the 1.714.0010 CSI interface.
• Real time monitoring of chromatograms during recording.
• Diverse possibilities for graphical representation and manual re-
processing of chromatograms.
• Calibration with internal or external standard method, multipoint cali-
brations with linear, quadratic or cubic regression.
• Free formatting of result printouts.
• Automatic reprocessing of evaluated chromatograms ("Queue").
• Export and import possibilities for chromatograms and reports.
• Remote control of IC instruments.
1.2 System requirements
Computer recommended min. 486 processor running
at 33 MHz or faster, 1 free slot
Operating system Windows 95
Disk space min. 4 MB on hard disk
RAM min. 8 MB, recommended 16 MB