Metrohm 714 IC Metrodata - Manual (Page 39)

3.4 Multipoint calibration
IC Metrodata for Win95
33
• Because the second up to the x th standard have been recorded as
samples (0) the levels belonging to the standard have to be en-
tered into the Level column. For each level enter the level numbers
already defined in the Concentrations window into this column
(standard 1 = Level 1, standard 2 = Level 2, etc.).
• Afterwards click the ReProcess button. In the Reprocessing window,
switch on the options as shown below.
• Click the Start button.