Metrohm 714 IC Metrodata User Manual

Page 57

3.8 Method associated remote control

IC Metrodata for Win95

Start inject programm and data acquisition

•

Select

Equipment

of the

Method

menu.

•

Click on

732 IC Detector[ COM# ]

in the

Start with method

field. After-

wards, click the Ð button to move this entry into the lower

Start with

inject

field.

•

Click on

or select

Restart method

of the

Acquire

menu.

•

Update the parameters in the

Start Run

window. Open the

Measure

tab and select the

Extern

option for

Start mode

. Start the method

with

•

The parameters stored in the method and the time program are

sent to the 732 IC Detector.

in the lower left part of the window

shows that the PC is sending data.

•

As soon as the program at the 732 IC Detector is ready, the LED in

the key at the 732 IC Detector lights up. The pro-

gram is now waiting for an

Inject

at the valve A of the 733 IC Sepa-

ration Center.

•

If the

Restart Method

option is selected in the

Method / Method Setup /

Processing

menu, the time program is restarted at the end of the

program. If the

Restart Method

option is not selected in the

Method /

Method Setup / Processing

menu, the program is performed only

once. If the method is started from a queue, the program is

stopped as soon as all rows of method X are worked off.

•

A time program of the

Inject

type is also stored as program type

cycle

with

number of cycles = 1

. The time program and the parame-

ters are sent again to the 732 IC Detector at the end of the chroma-