Metrohm 774 Oven Sample Processor - Manual (Page 80)

5 Detailed description
774 Oven Sample Processor, Instructions for use 74
parameters
>manual stop
Submenu for defining reaction to manual stop
Open the submenu with
The following entries define the commands to be executed when the
key is pressed. This allows connected peripherals to be stopped
automatically or the functions of the 774 Oven Sample Processor to be reset.
>manual stop
Rmt CTL: ********
Signal output via remote interface
STOP device1,
14 bit (1,0 or *)
> manual stop
RS232 CTL:
Data to be transmitted via RS 232 in-
terface
14 ASCII characters Clear value '&M;$S'
> manual stop
FLOW: cont.
Leave gas flow unchanged or
deactivate it
cont., OFF
> manual stop
HEATER: INIT °C
Set oven heater to specific tempera-
ture or switch it off
INIT, OFF,
50…250 °C