Metrohm 774 Oven Sample Processor - Manual (Page 74)

5 Detailed description
774 Oven Sample Processor, Instructions for use 68
PARAM
5.3.2 Parameters
All settings of the Parameter Menu constitute a method and may be saved as such.
Main Menu:
parameters
number of samples rack
Number of samples to be processed
1…999,
rack,*
rack = one entire rotation of the rack
*
= infinite number of samples
All sample positions of an engaged rack will be processed when the instrument is on the ‘rack’
setting. (max. number of rack positions – number of special beakers defined). It is important that
the changer can recognize the rack. This is only possible when the rack is at the ground position.
It is recommended to initialize the changer with the key.
parameters
>start sequence
Open the submenu with
parameters
>sample sequence
Use < Ï > or <Ð> to move up or down one menu item
parameters
>final sequence
Use or to move to first or last menu
item respectively
parameters
>report
Return to the normal state with
parameters
>changer settings
parameters
>timeout settings
parameters
>gas flow
parameters
>dosing unit def.
parameters
>manual stop
Submenus:
Up to 99 lines can be entered as a sequence in submenus '>Start Sequence', '>Sample Se-
quence' and '>Final Sequence'. The commands can be entered directly on the keyboard. The
command keys arranged at the right-hand half of the keyboard are available.