Metrohm 774 Oven Sample Processor User Manual

Page 157

6.5 Initialise data memory

774 Oven Sample Processor, Instructions for use

151

• Press key to open the following Diagnosis menu:

>RAM initialization
select: param

>RAM initialization
select: config

>RAM initialization
select: setup

>RAM initialization
select: assembly

>RAM initialization
select: all

Set method parameters to default val-

ues.

Set device configuration to default

values.

Set Setup parameters to default values.

Set Assembly parameters to default values.

Erases all user-defined methods

The sub-menus can be selected one after the other by pressing key lect>. You can access the individual initialisation variants with key
, and you can quit with key .

The table shows what parts of the data memory are affected by the corre-
sponding initialisation variants. In the case of a system crash (undefined
display), no responses to keystrokes etc.), it is advisable to use initialisation
variant "

all

• If necessary, press key