Diode LED RGB Color & LED Wi-fi - Manual (Page 4)

4
Color-Changing RGB Installation
To install an RGB LED fixture, connect the red lead to the negative (R) terminal; the green lead to the negative
(G) terminal; & the blue lead to the negative (B) terminal of the controller. Connect the remaining positive lead
to the positive (V+) terminal of the controller.
Color Temperature (CT) Adjustable Installation
It is recommended to install a 2700k LED fixture for every 5000k fixture and mount the separate fixtures
parallel to each other. The CT controller application can then adjust the combined light output of the LED
fixtures to achieve a custom color temperature between 2700k-5000k. To install, connect the negative (-)
lead of the 2700k fixture to the negative (WW) terminal of the controller. Next, attach the negative (-) lead
of the 5000k fixture to the negative (W) terminal of the controller. The remaining positive (+) leads of each
fixture must be tied together and connected to the single positive (V+) terminal of the controller.
V+
Warm White Fixture
RGB Color Changing Strip Light
Cool White Fixture
X
V-
V-
120V AC
120V AC
Wi-Fi
Controller
Wi-Fi
Controller
Wi-Fi
Controller
V+
BLUE
GREEN
RED
Dimmable (DIM) Single-Color Installation
Up to 3 separate single color LED fixtures can be directly connected to the Wi-Fi LED Controller’s terminal
block and dimmed over the wireless network with your mobile remote. Connect each negative lead of your
single color fixtures to each separate negative (W) terminal. The remaining positive leads of your single
color fixtures must be tied together and connected to the single positive (V+) terminal.
V+
V-
V-
V-
12V~24V DC
Driver
12V~24V DC
Driver
12V~24V DC
Driver
120V AC
Connecting your DC12V~DC24V Constant Voltage Driver to the Wi-Fi LED Controller
The Wi-Fi LED Controller must be powered with a compatible DC12V~DC24V constant voltage driver. Please contact our customer service team or visit the Wi-Fi
LED Controller product page for a list of compatible drivers.
To connect your driver, attach the negative output lead of your driver to the negative (-) input terminal of the controller and positive output lead of your driver to
the positive (+) input terminal of the controller.
Wiring Diagrams & Configuration
+
–
+
–
+
–
Note: The lead marked for NC is
non functional in this mode.