Diode LED RGB Inline Button LED Controller - Manual

Page 1 of 1
INSTALLATION GUIDE
+
-
V+
G
R
B
V+
G
R
B
MODE DEMO SPEED COL
OR
MODE DEMO SPEED COL
OR
Positive
Output
V+
G
R
B
V+
G
R
B
THIS CONTROLLER DOES NOT SUPPORT SHORT CIRCUIT PROTECTION. DO NOT CROSS WIRES OF LED
OUTPUT WHEN CONNECTED TO POWER OR THE CONTROLLER MAY BECOME PERMANENTLY DAMAGED.
Input From 5-24V
Plug-In Adapter
Output To LED Load
V 1.0
Before you begin, read all warnings and installation instructions thoroughly.
Safety & Warnings
• Install in accordance with the National Electric Code, and local regulations.
• Do not connect directly to high voltage 120V AC power.
• Install in-line between a compatible 5-24VDC constant voltage plug-in adapter and 5-24VDC RGB fixture.
• Maximum Output: 60W @ 12V, 96W @ 24V
• This controller does not support short circuit protection. Do not cross wires of LED output or the controller may become permanently damaged.
• This product is rated for indoor installation and is not protected against moisture.
• Utilize the wiring diagrams in this installation guide for basic installations.
RGB IN-LINE CONTROLLER
DO NOT connect directly to 120VAC. Install in accordance with the National Electric Code, and local regulations.
Operation
Switch between 19 dynamic modes.
Long press to turn power ON/OFF. Short press to adjust 5 levels of static brightness.
Short press to adjust 5 levels of speed within dynamic modes.
Switch between 20 shades of static colors including Red, Blue, Cyan, Green, Yellow,
Magenta, Violet and Cool White.
MODE
DEMO
SPEED
COLOR
Wiring Connections
Maximum Output: 60W @ 12V, 96W @ 24V