Diode LED LO-PRO Junction Box - Manual

1.877.817.6028
www.DiodeLED.com
[email protected] www.DiodeLED.com
INSTALLATION GUIDE
1 OF 1
LO-PRO ™ JUNCTION BOX
®
IG080714-1.1
The Lo-Pro™ Junction Box
Installation & Details
Features & Specifications
Certifications: ETL Listed (Conforms to UL STD 508A)
Enclosure: NEMA 1 steel
Environment: Indoor only
Ambient Temp.: Not to exceed 40ºC (104ºF)
Mounting: Integral mounting holes with (4x) .20” mounting
holes for surface mounting
Knockouts: (4x) 1/2” NPT Knockouts
Dimensions: 7.7”W x 1.8”H x 4.9”D
Weight: .80 lbs
Voltage: < 600V
Warranty:
2 years (limited)
8-32 by 3/8” screws
(Black Oxide)
8-32 by 3/8” screws
(Black Oxide)
4-40 x 5/16 screws
(Black Oxide)
4-40 nut
1/2” NPT
Knockouts
Slotted Hex
Zinc Green
1/2” NPT
Knockouts
The Lo-Pro™ Junction Box is designed for use with the
following Mean Well brand 12V Drivers:
12V - 20 Watt Class 2 Non-Dimmable Driver
12V - 35 Watt Class 2 Non-Dimmable Driver
12V - 60 Watt Class 2 Non-Dimmable Driver
Product Includes:
1 x Lo-Pro Junction Box with cover
1 x Slotted hex screw, 8-32 x 3/8” zinc green for ground.
1 x 4-40 nut and 4-40 screw to secure driver within the
enclosure
2 x 8-32 by 3/8” screws to lock box cover in place
0.20” mounting holes within the enclosure are for use with
#10 hardware (not included).
Mounting & Installation Guidelines
• Mount the enclosure in a suitable location that assures
free airflow to and around the enclosure. Assure that the
power supply and enclosure ventilation holes are not
obstructed.
• This enclosure must be installed in accordance with
the National Electrical Code, ANSI/NFPA 70, where the
ambient temperature does not exceed 40ºC (104ºF).
• State and local building codes may vary. See electrical
codes in your region for accurate installation and usage
guidelines.
• Standard 1/2” NPT Knockouts are provided for wire
entry and exit. Knockouts may require romex connectors
or bushings in accordance with safety codes. Check
local electrical guidelines for details.
*Power Supply Sold Separately
N = Blue / L = Brown / G= Ground (+) = Red / (-) = Black
120V AC
Input
12V DC
Output
N
L
AC
Input
DC
Output
L N G – +
+
–
Driver Mounting Screw