Rockwell Automation 1394 SERCOS Interface Multi-Axis Motion Control System Installation Manual - Manual (Page 15)

Publication 1394-IN002B-EN-P — February 2004
Installing Your 1394 SERCOS Interface System 1-5
Before Mounting Your
System Before you mount your 1394 SERCOS interface system make sure you
understand the following:
•
how to unpack the 1394 system and axis modules
•
the system mounting requirements
•
how to determine your mounting hole layout
Unpacking Modules
Each 1394 system module ships with the following:
•
One system module
•
One system terminator
•
One installation manual (publication 1394-IN002x-EN-P)
•
Mating power connectors (5 and 10 kW only)
•
Mating I/O and feedback connectors
•
Cable shield grounding clamps
Each 1394 axis module ships with the following:
•
One 1394 axis module
•
TB1 and TB2 connectors
•
Cable shield grounding clamp
•
One 1394 axis module information sheet (publication 1394-5.5)
Remove all packing material, wedges, and braces from within and
around the components. After unpacking, check the item(s)
nameplate catalog number against the purchase order. Refer to
Appendix C for more information on catalog numbers.