Rockwell Automation 1333 Drive, 3/4-5HP, 230-575V Series D - Manual (Page 32)

Installation and Wiring
Chapter 4
4-15
If You Use
200/208/230V AC, 1ĆPhase Input Voltage
Power Recommended
Rating Wire Wire Recommended
Code Group ❶ Size ❷ Torque ❸
ZAA 2 14 AWG (2.5mm 2 ) 9 In-lbs (1.02N-m)
AAA 2 14 AWG (2.5mm 2 ) 9 In-lbs (1.02N-m)
YAA 2 14 AWG (2.5mm 2 ) 9 In-lbs (1.02N-m)
BAA 2 12 AWG (4.0mm 2 ) 9 In-lbs (1.02N-m)
CAA 2 10 AWG (6.0mm 2 ) 9 In-lbs (1.02N-m)
DAA 2 8 AWG (10.0mm 2 ) 10 In-lbs (1.13N-m)
EAA 2 8 AWG (10.0mm 2 ) 10 In-lbs (1.13N-m)
❷
Wire group number chart, page 4-6.
CAUTION :
230/208VA.C.
Input Voltage Only
Use 75 Degree C ❷ AWG Copper Wire
Torque to ❸ Lb-in
(Power Terminal Block Cover)
Select from the following drive input fuses.
Drive Rating ZAA Fuse Size 15AFuse Type 600V Class K5 UL Listed or Equivalent
Drive Rating AAA Fuse Size 15AFuse Type 600V Class K5 UL Listed or Equivalent
Drive Rating YAA Fuse Size 15AFuse Type 600V Class K5 UL Listed or Equivalent
Drive Rating BAA Fuse Size 30AFuse Type 600V Class K5 UL Listed or Equivalent
Drive Rating CAA Fuse Size 40AFuse Type 600V Class K5 UL Listed or Equivalent
Drive Rating DAA Fuse Size 70AFuse Type 600V Class K5 UL Listed or Equivalent
Drive Rating EAA
Fuse Size 80AFuse Type 600V Class K5 UL Listed or Equivalent