Rockwell Automation 1441-DYN25-Z Dynamix 2500 Data Collector User Manual
Page 115
Rockwell Automation Publication 1441-UM001B-EN-P - September 2012
115
Loading and Unloading
Chapter 4
for details on how to initialize memory
using the Dynamix 2500 data collector.
Follow these instructions to automatically initialize the data collector before
loading a list.
1.
Choose Tools > Load/Unload.
2.
In the Load/Unload dialog box, click Load Options.
The Load Options dialog box appears
.
3.
Check the Initialize data collector before loading checkbox.
4.
Click OK.
You must have the Dynamix 2500 data collector connected to the computer. You
can also use the unit to initialize memory.
Follow these steps to manually initialize the data collector any time.
1.
Choose Tools > Load/Unload.
2.
Click DC. Functions in the Load/Unload dialog box.
IMPORTANT
Initializing the data collector memory erases the existing data. Be
sure that you no longer need the data before deleting it.
Check to
automatically
initialize.
TIP
If you are manually initializing the memory card, you must also
have the SD card in the drive.