RKI Instruments Gas Tracer - Manual (Page 65)

Gas Tracer Operator’s Manual Display Mode • 57
3. If snap logs have been performed in either Normal Operation or
Leak Check Mode Operation, one of the following screens will
appear. LEAK CK MODE will appear in the upper left corner of
Leak Check Mode Operation data to indicate that the snap log was
taken during Leak Check Mode Operation.
This screen indicates the year, month, day, and time that the most
recent snap log was taken. The number along the bottom of the
screen indicates the snap log ID number. The first snap log that is
taken is given an ID of M001. The next snap log ID is M002. The ID
number increases sequentially with each set of snap log data. Use
the AIR▲ and (SHIFT)▼
buttons to scroll through different snap
log IDs and view what time and day they were taken. Snap log
data that was taken in Leak Check Mode operation will have two
snap log ID numbers. One number is for the base reading and the
other is for the peak reading.
2012
2
15
14:17
LEAK CK MODE
M009
2011
8
31
22:39
M023
Normal Operation Leak Check Mode Operation
Snap Log Snap Log