RKI Instruments Gas Tracer - Manual (Page 45)

Gas Tracer Operator’s Manual Measuring Mode, Normal Operation • 37
you should press the POWER ENTER button to save a set of snap
log data. The fourth screen displays the current gas readings, and
that you should press the DISPLAY (ADJ) button to exit Snap Log
Mode without saving a set of snap log data.
2. You can change the Station ID to be used with the snap log by
pressing the (SHIFT)T button and then pressing the DISPLAY
(ADJ) button. The Station ID Select Screen will appear and the
current Station ID will be flashing.
3. Use the (SHIFT)T and AIRS buttons to scroll to the desired
station ID, then press and release the POWER ENTER button to
return to the Snap Logging Screen sequence.
To return to the Snap Logging Screen sequence without changing
the station ID, press and release RESET SILENCE.
4. To take a snap log of the current gas readings, press and release the
POWER ENTER button. The unit will display SAVED along the
bottom of the screen before returning to the Snap Logging Screen
sequence.
To exit Snap Log Mode without taking a snap log or when you are
finished recording snap logs, press and release the DISPLAY (ADJ)
button. The unit will immediately return to the Normal Operation
Screen.
5. The data recorded in Snap Log Mode can be viewed in Display
Mode. See “Snap Logging Screen” on page 56 for more
information.
S Id
SEL
001
SAVED