RKI Instruments Gas Tracer - Manual (Page 189)

Gas Tracer Operator’s Manual Replacing or Recharging the Batteries • 181
If using a DC powered charging station, plug the 12 VDC vehicle
plug adapter into a vehicle’s 12 VDC power socket.
Figure 22: Connecting the Charging Station’s DC Adapter
The construction of the charging stations allows them to be chained
together but a separate adapter must be used for each charging
station. One adapter will not operate more than one charging
station.
4. Place the Gas Tracer into the battery charging station as shown in
Figure 23 below so that the metal contacts on the back of the unit
come into contact with the metal contacts on the back of the holder
in the charging station. When proper contact has been made, the
red LED on the charging station will turn on.
If you are using a DC adapter, the charging station comes with a
velcro strap to secure the Gas Tracer. Ensure that both ends of the
velcro strap are attached to the charging station and that it is
securing the instrument.
To Vehicle
12 VDC
Power Socket
DC Adapter
Charge LED
DC Powered Charging Station
Power Supply Jack