RKI Instruments Gas Tracer - Manual (Page 164)

156 • Using Maintenance Mode Gas Tracer Operator’s Manual
Turning the Clear Data Logger Screen On or Off
The DLOG DSP menu item allows you to turn the Clear Data Logger
Screen on or off. When set to ON (factory setting), the Clear Data
Logger Screen appears in Display Mode and allows the user to clear
any logged data. When set to OFF, the Clear Data Logger Screen does
not appear in Display Mode and any logged data cannot be cleared
from Display Mode.
1. Use the AIRS or (SHIFT)T buttons to display the DLOG DSP
menu item.
2. Press and release the POWER ENTER button. The screen will
indicate the current setting.
3. Use the AIRS or (SHIFT)T button to display the desired setting.
4. Press and release the POWER ENTER button to save the setting
and return to the main menu.
MAINTENANCE
DLOG DSP
On
MAINTENANCE
DLOG DSP