RKI Instruments Gas Tracer - Manual (Page 61)

Gas Tracer Operator’s Manual Display Mode • 53
Pump OFF Screen
WARNING: The Gas Tracer is not a gas monitoring device while the
pump is off.
NOTE: This item appears in Display Mode only if the POFF DSP menu
item in Maintenance Mode is turned ON. The factory setting for
POFF DSP is OFF.
The Gas Tracer pump can be turned on and off in this screen. The
bottom line of this screen alternates between PUMP OFF, NO /DISP,
and YES/ENT. This feature can be used to conserve battery life if
there is a significant period of time until the next gas monitoring task,
but you do not want to wait for the warmup sequence to complete if
you turn the instrument off and on again.
In this screen, press POWER ENTER to turn the pump off. The fan in
the upper right corner of the screen will disappear. Once the pump is
off, you cannot exit this screen and return to normal operation or
continue in Display Mode until you turn the pump back on. To turn
the pump back on and continue in Display Mode or return to Normal
Operation, press the POWER ENTER button again.
User ID Screen
This screen displays only if ID DISP in the Maintenance Mode menu
is set to ON (see “Turning the ID Display Function On or Off” on
page 167). Each user ID can contain up to 16 characters but only the
first 8 of those characters are visible in the instrument. Be sure that all
user IDs are distinguishable from each other by viewing only the first
8 characters. For more information, see the GX-2012 Data Logger
Management Program manual. Uppercase letters, numbers, asterisks
(*), dashes (-), and a blank space are available characters. The Gas
Tracer can store 128 user IDs. The bottom line of this screen alternates
between YES/ENT., the current user ID, and NO /DISP.
Use this screen to identify or change the user. The user ID provides a
way to identify the user during a data logging session. The user ID is
On
PUMP OFF