RKI Instruments Gas Tracer - Manual (Page 169)

Gas Tracer Operator’s Manual Using Maintenance Mode • 161
full.
With OVER WRT set to OFF, the Gas Tracer stops saving data to the
data logger when the data logger memory is full.
1. Use the AIR▲ or (SHIFT)▼ buttons to display the OVER WRT
menu item. Press and release the POWER ENTER button. The
screen will indicate the current setting.
2. Use the AIR▲ or (SHIFT)▼ button to display the desired setting.
3. Press and release the POWER ENTER button to save the setting
and return to the main menu.
Updating the Calibration Interval
This CL INTVL setting defines the amount of time between
calibrations. The minimum setting is 1 day and the maximum setting
is 365 days. The factory setting is 90 days.
1. Use the AIR▲ or (SHIFT)▼ buttons to display the CL INTVL
menu item. Press and release the POWER ENTER button. The
screen will indicate the current setting.
2. Use the AIR▲ or (SHIFT)▼ button to display the desired setting.
Tip: Press and hold the AIR▲ or (SHIFT)▼ button to rapidly scroll
through the settings.
3. Press and release the POWER ENTER button to save the setting
and return to the main menu.
On
MAINTENANCE
OVER WRT
90
MAINTENANCE
CL INTVL