MacDon D60 Draper Headers - Manual (Page 4)

Form 169441 2 Revision B
2 MODEL AND SERIAL NUMBER
NOTE: Right hand (RH) and Left-hand (LH) designations are determined from the Operator’s position, facing
forward.
Record the Model Number, Serial Number and Model Year of the Header, and Slow Speed Transport/Stabilizer
Wheel Option (if installed), on the lines below:
HEADER MODEL___________SERIAL NUMBER________________YEAR______
Serial Number Plate is located on the left hand endsheet, near the knife
drive motor.
SLOW SPEED TRANSPORT/STABILIZER WHEEL OPTION
SERIAL NUMBER__________________YEAR______
Serial Number Plate is located on the left hand wheel pivot
tube.