MacDon D60 Draper Headers - Manual (Page 23)

SECTION 6. SPECIFICATIONS
Form 169441 21 Revision B
HEADER MODEL D60 D50/D60 D60
HEADER SIZE 15 FT. 20 FT. 25 FT. 30 FT. 35 FT. 40 FT.
CONVEYOR AND DECKS
Draper Drive Hydraulic
Draper Width
41.6 in.
(1057 mm)
Draper Speed
0 - 742 ft/min
(225 m/min)
Delivery Opening
D50 Not Applicable
67.3 - 75.6 in.
(1710 - 1920 mm)
Not
Applicable
D60
60.61 - 69.7 in.
(1540 - 1770 mm)
67.1 - 76.7 in.
(1720 - 1950 mm)
Height
37.2 - 41.7 in.
(945 - 1058 mm)
Draper Angle
(Cutterbar on Ground)
D50 & D60 13.0° - 18.4°
REEL
Drive Hydraulic From Windrower Hydraulic Oil Supply
Speed 0 - 62 rpm
Quantity of Tine Tubes 6/9 5 - D50, 6 / 9 - D60 5 / 6 5
Effective Reel Diameter
65 in.
(1650 mm)
Finger Tip Radius Range
30.2 - 31.5 in.
(766 - 800 mm)
Finger Type
Plastic - Standard
Heavy Duty Plastic Standard Optional D60 -
Finger Spacing
6.0 in.
(152.4 mm)
UPPER CROSS AUGER (Optional)
Outside Diameter 12 in. (305 mm)
Weight (lb (kg))
134
(61)
163
(74)
192
(87)
221
(100)
250
(113)
279
(127)
STABILIZER WHEELS (Optional)
Size
Not Applicable
ST205 / 75R-15
Pressure
Load Range E - 80 psi (552 kPa)
Load Range D - 60 psi (415 kPa)
Weight 200 lb (91 kg)
NOTES: 1. Specifications and design are subject to change without notice, or obligation to revise previously sold units.
2. Weights do not include options.