MacDon D60 Draper Headers - Manual (Page 122)

SECTION 8. MAINTENANCE AND SERVICING
Form 169441 120 Revision B
8.9.3 REEL CENTERING
8.9.3.1 Double Reel Headers
The reels should be centered between the
endsheets.
a. Loosen bolt (A) on each brace (B).
b. Move forward end of reel center support arm (C)
laterally as required to center both reels.
c. Tighten bolts (A), and torque to 265 ft·lbf
(359 N·m).
8.9.3.2 Single Reel Headers
The reel should be centered between the
endsheets.
a. Loosen bolt (D) on brace (E) at both ends of reel.
b. Move forward end of reel support arm (F) laterally
as required to center reel.
c. Tighten bolts (D), and torque to 265 ft·lbf
(359 N·m).
C
A
B
D60
D60
E
J
D
D50
F
D
E