MacDon D60 Draper Headers - Manual (Page 155)

SECTION 10. OPTIONS AND ATTACHMENTS
Form 169441 153 Revision B
10.6 LODGED CROP REEL FINGER KIT
Available as an attachment for use with D50 and
D60 Harvest Headers.
The steel fingers attach to ends of “every other”
tine bar and help in clearing material in heavy
hard to cut crops.
Two kits are required for modifying each bar of a
6-bat reel.
Installation and adjustment instructions are
included with the kit.
10.7 VERTICAL KNIFE MOUNTS
The vertical knife mounts allow installation of
vertically oriented sickles onto both ends of D50
and D60.
The SABRE vertical knife must be obtained from
Canadian Agri Technologies. See your MacDon
Dealer for further details.
Installation and adjustment instructions are
included with the kit.
10.8 UPPER CROSS AUGER KIT
Available as an attachment for use with D50 and
D60 Harvest Headers.
The cross auger helps deliver very bulky crops
across the header onto the windrow.
Installation and adjustment instructions are
included with the kit.
10.9 REEL ENDSHIELD KIT
Available as an attachment for use with D50 and
D60 Harvest Headers.
The steel shields attach to ends of the reel and
help in clearing material in heavy hard to cut
crops.
Installation and adjustment instructions are
included with the kit.
10.10 DOUBLE DRAPER DRIVE
Available for 25 to 40 FT. D60 headers. This
option minimizes draper slipping in heavy forage
crops when using the side delivery feature, by
having four draper rollers powered instead of the
normal two.
Installation instructions are included with the kit.