Brother Fax-1020Plus - Manual (Page 87)

7-2
RECEIVING FAXES AND OTHER CALLS - CHAPTER 7
Automatic Fax Only Reception (FAX Mode)
You can automatically receive all your faxes in Automatic Fax Reception mode (FAX light
is ON). Select this mode by pressing Mode.
Manual Reception (MANUAL Mode)
When you set the Answer Mode to manual, you must answer each incoming call yourself.
Here is what you should do when using MANUAL Mode:
If You Get a... Then You Should...
1. Phone call Talk as you normally would.
2. Phone call and request Press Start when finished talking, and replace the handset.
to send a fax Note: Sender must also press Start.
3. Fax tone... Press Start, and replace the handset.
Fax Detect
When you use this feature, you don’t have to press Start, but need to wait for several
seconds quietly, when you answer a fax call. Just replace the handset after your fax machine
begins to receive the fax. Selecting “ON” allows the machine to receive fax calls
automatically, even if you lift the handset of an extension. Selecting “SEMI” lets the fax
machine receive the call only if you’ve answered it at the fax machine. Selecting “OFF”
means you’ll have to activate the fax machine yourself by pressing Start or entering the
remote activation code from an extension phone.
THE DISPLAY WILL SHOW: KEYS TO PRESS
09/12 15:25 FAX
1.TEMP.SETTINGS
7.SETUP SYSTEM
6.FAX DETECT
FAX DETECT:ON
SELECT { } & SET
FAX DETECT:SEMI
1. Press Menu .
2. Press 7 .
3. Press 6 .
4. Press Z (left arrow) or X (right
arrow) to choose ON, SEMI or OFF.
Example: SEMI.