beautypg.com

Brother Fax-1020Plus User Manual

Page 39

background image

3-6

HOW TO USE ON-SCREEN PROGRAMMING (OSP) AND HELP KEY - CHAPTER 3

Level one

function

Level two

function

Explanation of Options

Factory

setting

Chapter

9

OFF

You can store the incoming fax messages in the
memory. Then you can use the convenient remote
control functions.
ON/OFF

FAX FORWARDING ON cause the fax machine
to send any stored faxes that are received to another
predetermined fax number.
ON/OFF

You can register a REMOTE ACCESS ID (3 dig-
its) allowing you to remotely operate the machine.
(Example : Retrieving an incoming fax message)

You can print incoming faxes that were stored in
memory.

You can select the way you use your memory in
message store mode.
DOC./VOICE

You can set the machine to print a back-up copy of
faxes that are received into the Message Manager
memory. ON/OFF

You can choose between PAGING, FAX
FORWARDING or OFF. PAGING ON will enable
you to be paged by Message Manager when it
receives FAX/TAD. FAX FORWARDING ON
enables you to have the Message Manager send
any stored faxes that are received to another
predetermined fax number.

You can change REMOTE ACCESS ID (3 digits)
allowing you to remotely operate the machine.
(Example: Retrieving

incoming messages)

You can select Max. ICM (Incoming Message)
recording time. 35/40/45/50/55/60 seconds

The machine has three types of OGM (Outgoing
Messages) for TAD, FAX/TEL switch and
PAGING. After selecting the message type, you
can play, record or erase.

If you set PLAYING OGM to ON, the recorded TAD,
or F/T OGM is re-played if you change the receiving
mode to TAD or F/T respectively. ON/OFF

If you set TOLL SAVER to ON, you can check if a
message was received by the ring delay.
ON/OFF

1. FAX

STORAGE

8. REMOTE

FAX OPT

2. FAX FWD

OFF

9

9

159*

3. REMOTE

ACCESS

4. PRINT

DOCUMENT

9

(Only for FAX

1020 Plus)

ON

DOC.:OFF

VOICE:ON

1. MESSAGE

STORE

2. BACKUP

PRINT

10

10

OFF

6. OGM

10

OFF

10

159*

10

35

10

7,10

10

ON

8. TOLL

SAVER

7. PLAYING

OGM

5. ICM MAX.

TIME

4. REMOTE

ACCESS

3. FAX FWD/

PAGING

8. SETUP

TAD
(Only for
FAX 1030
Plus)

This manual is related to the following products: