Brother Fax-1020Plus User Manual
Page 103
7-18
RECEIVING FAXES AND OTHER CALLS - CHAPTER 7
The Caller ID is Stored in Your Machine’s Memory
The machine can store a maximum of the last 30 incoming caller IDs in the memory, along
with the time and date of reception. The 31st call will cause the oldest ID to be erased.
The Caller ID information stored in the memory can be used for the following.
•
Selecting a Caller ID from the Memory for Call Reply.
You can scroll through the Caller IDs on the display and select one for your machine to
dial.
•
Printing the Caller ID List.
You can review calls you received by checking the Caller IDs in memory. This report
will list the Date, Time, Phone Number (Caller ID), and type of call (Comment).
NOTE: Please set up the number of rings to more than 02 in the Ring Delay (see chap. 7)
before you use the Caller ID. If you set up the number of rings to 01, you cannot
receive the Caller ID.
Set the Caller ID to ON
If you have the Caller ID on your line, then this function should be set to ON to display the
caller’s phone number on the fax LCD as the telephone rings.
1. Press
Menu
.
2. Press
6
.
3. Press
7
.
(Press
8
on Fax 1030 Plus)
4. Press Z (left arrow) or X (right
arrow) to choose ON.
5. Press
Set
.
6. Press
Stop
to exit.
09/12 15:25 FAX
1.TEMP.SETTINGS
6.TEL OPTIONS
7.CALLER ID
DISPLAY ID
SELECT { } & SET
CALLER ID:ON
7.CALLER ID
KEYS TO PRESS
THE DISPLAY WILL SHOW: