Brother Fax-1020Plus - Manual (Page 67)

6-6
SENDING FAXES - CHAPTER 6
2. Enter the fax number. You can use
number-keys dialling, One-Touch
dialling, Speed dialling, or Tel-
Index.
Example: One-Touch dialling.
SWISS OFFICE
DIALLING
SEND P.01 STD
Sending a Fax Manually
1. Insert the documents face down into
the feeder.
2. Pick up the handset and listen to the
dial tone.
09/12 15:25 FAX
FAX: NO. & START
COPY: PRESS COPY
ENTER FAX NO.
THEN PRESS START
SWISS OFFICE
SEND P.01 STD
KEYS TO PRESS THE DISPLAY WILL SHOW:
Automatic and Manual Re-dialling
If a number you have dialled is busy or your call did not go through for some other reason,
you can re-dial that number. There are two ways to re-dial, “automatic” and “manual.”
Automatic redialling can only be used for faxes that were sent using automatic transmission—
not for telephone calls. The fax machine will automatically re-dial the number 4 times at 2
minutes intervals (for the U.K.), 3 times at 2 minutes intervals (for Ireland), before giving
up. It will re-dial the last dialled number when you press Redial/Pause (manual re-dialling).
3. Enter the fax number. You can use
number-keys dialling, One-Touch
dialling, Speed dialling, or Tel-
Index.
3. Press Start .
4. When you hear the fax tones from
the remote machine, press Start
again.
Your fax machine will begin sending
the documents.
5. Return the handset to its cradle.