Brother Fax-1020Plus - Manual (Page 174)

MESSAGE MANAGER PLUS SETTINGS (Only for FAX 1030 Plus)
11-18
Erasing All of the Doc/Voice ICMs at One Time
It is not possible to erase a single fax message, you can only erase them all or none of them.
(See this page “Erasing All of the Fax/Voice ICMs at One Time.”)
If you choose to erase all the fax messages, your fax machine will automatically print any
fax messages that have not been printed and that have been retrieved remotely, before it
erases them from the memory.
THE DISPLAY WILL SHOW: KEYS TO PRESS
MAIL BOX:1 345
VOICE:02 DOC:09
BOX NO.:01
SELECT { } & SET
BOX NO.:03
PASSWORD:XXXX
PASSWORD:9999
ERASE ALL VOICE?
SELECT { } & SET
ERASE THIS MSG?
1.YES 2.NO
MESSAGE 01/07
6. Erase the message either during or
immediately after playback by
pressing
Erase .
1. While holding down Shift , press
Erase .
2. Press Z (left arrow) or X (right
arrow) key to select your own
personal mailbox number.
Example: 03.
7. Press 1 .
The machine will erase that message
and go to the next ICM.
5. Press Set and wait 2 seconds.
3. Press Set .
4. Use the number keys to enter your
own 4-digit password.
Example: 1234