Brother Fax-1020Plus - Manual (Page 126)

10-1
MESSAGE MANAGER MODE SETTINGS (Only for FAX 1030 Plus) - CHAPTER 10
Chapter 10. MESSAGE MANAGER MODE
SETTINGS (Only for FAX 1030 Plus)
The Message Manager Memory has two modes for different uses: the Message Manager
Mode and the Message Manager Plus Mode. The Message Manager Mode allows you to
store the incoming fax/voice messages into a flexible memory. Fax retrieval, Paging and
Fax Forwarding features are available in this mode. The Message Manager Plus Mode is an
additional enhancement to the Message Manager Mode, and provides Voice-on-Demand
and Personal Mailbox features. This chapter explains how the standard Message Manager
Mode performs. (The Message Manager Plus Mode is explained in chapter 11.)
The FAX and F/T lights must be lit to turn on either Message Manager Mode or Message
Manager Plus Mode.
NOTE: The TAD Outgoing Message (TAD OGM) must be recorded before you can activate
the Message Manager Mode (TAD mode).
A) GETTING STARTED
What Is the Message Manager Mode?
The Message Manager is a large flexible memory to effectively manage your voice and fax
messages, while you are out.
This flexible memory can be used for voice messages, fax messages or a combination that
stores both types on a “first come first served” basis. Any fax or voice message that is stored
in the memory can be retrieved from a remote location.
Record Erase Play Doc Voice
status
FAX
TAD
F/T