Brother Fax-1020Plus - Manual (Page 121)

9-4
REMOTE FAX OPTIONS - CHAPTER 9
Setting the Remote Access Code
The initial setting for the remote access code on your new fax is “159*”.
You may change this code if you wish to.
09/12 15:25 FAX
1.TEMP.SETTINGS
8.REMOTE FAX OPT
3.REMOTE ACCESS
ACCESS CODE:159*
ACCESS CODE:160*
3.REMOTE ACCESS
1. Press Menu .
2. Press 8 .
3. Press 3 .
4. Enter a three digit number 000 to
998 . The last digit, an asterisk, can
not be changed.
Example:
160 * * * * *.
Enter a three digit number 000 to
998.
5. Wait for two seconds.
6. Press Stop to exit.
KEYS TO PRESS THE DISPLAY WILL SHOW:
Helpful Hints
Change the remote control code frequently and use it as a “secret password” to limit access to
your REMOTE FAX OPT.
When you use the Remote Access Code, you must press all four keys (three-digit number plus *).