Brother Fax-1020Plus - Manual (Page 51)

4-8
FUNCTION SETTINGS - CHAPTER 4
1.ONE-TOUCH DIAL
SELECT ONE-TOUCH
*05:
ENTER␣ &␣ SET
*05:4155551212_
NAME:
ENTER␣ &␣ SET
AME:SWISS OFFICE
TYPE OF NO.:FAX
SELECT {␣ } & SET
TYPE OF NO.:FAX
SELECT ONE-TOUCH
3. Press 1 .
4. Press the One-Touch key you want
to use to store a number.
Example:
One - Touch 05 .
The One-Touch keys are not the
number keys.
5. Enter a number (up to 20 digits).
Example: 4155551212 .
6. Press Set .
You then will be prompted to enter
the name or company associated
with this number.
8. Press Set .
Helpful Hints
If your fax machine is connected to a PABX, you may need to insert an additional number prefix
(e.g. “9”) and a “pause” before each fax or telephone number, in order to gain access to the
outside line. When you press Redial/Pause, a dash “-” will appear on the display. By storing a
pause, you can create a delay of 3.5 seconds.
7. Enter the name by using the number
keys (up to 15 characters).
Example:
SWISS OFFICE .
(See chap. 3 for how to enter text.)
9. Select the type of number (FAX,
TEL, F/T, ) by using Z (left arrow)
or X (right arrow) to display the
type you want.
Example: FAX.
11. Return to step 4 to enter another
number, or press Stop to return to
the date and time.
10. Press Set .