Brother Fax-1020Plus - Manual (Page 84)

6-23
SENDING FAXES
5.CALLBACK MSG.
PRESS START KEY
PRINTING
1. Press Menu .
2. Press 5 .
3. Press 4 .
4. Press Z (left arrow) or X (right
arrow) to choose either ON or OFF.
Example: ON.
09/12 15:25 FAX
1.TEMP.SETTINGS
5.USER OPTIONS
4.ERROR RE-TX
ERROR RE-TX:OFF
SELECT { } & SET
ERROR RE-TX:ON
4.ERROR RE-TX
5. Press Set .
6. Press Stop to exit.
KEYS TO PRESS THE DISPLAY WILL SHOW:
- This feature is available only for memory transmission using Memory key.
ECM (Error Correction Mode)
The Error Correction Mode (ECM) is a way for the machine to check the integrity of a fax
transmission while it is in progress. ECM transmissions are possible only between machines
that both have the ECM feature. If they do, you may send and receive fax messages that are
continually checked for their integrity.
Sufficient memory must be available in your machine for this feature to work.
Error Re-Transmission
Error Re-Transmission is helpful when the receiving machine does not have ECM. Even
though your machine cannot check the integrity of the message, it will resend the page(s)
effected after an error has been caused by accidental noise.
3. Press 5 .
4. Press Start .