Chapter 6. sending faxes, A) document basics the size of your documents, How to insert the document – Brother Fax-1020Plus User Manual
Page 62: Notice
![background image](/manuals/57022/62/background.png)
6-1
SENDING FAXES
Maximum
scanned
(printed)
area
Chapter 6. SENDING FAXES
A) DOCUMENT BASICS
The Size of Your Documents
curled
folded
staples
tape
wrinkled
ripped
paper clip
fabric
The size of the documents you want to send by fax should not be larger (or smaller) than
your fax machine can accommodate. The documents should each be between 148 and 216
mm (5.8 and 8.5 inches) wide and between 150 and 600 mm (5.9 and 23.6 inches) long.
There is generally a gap of 4 mm adjacent to each vertical and horizontal edge of the original
page to be transmitted, where no image can be scanned. Please therefore ensure that no
image data are present within these 4 mm “dead zones”.
The maximum width of the scanned area is 208 mm (8.2 inches).
How to Insert the Document
To send a fax, first insert the document you wish to send, face down, in
the document feeder. The top edge of the document should go in first, or
the fax will be received upside-down.
To prevent the document from feeding in crooked, adjust the paper guides
to fit the width of the document.
NOTICE
About the Documents You Send...
Do not use documents that are curled, wrinkled, folded, ripped, or that contain staples,
paper clips, paste, correction fluid or tape. Also, do not use cardboard, newspaper, or fabric.
TOP
Minimum
216mm (8.5")
208mm (8.2")
4mm
4mm
4mm
4mm
(
(
216mm (8.5")
600mm
(23.6")
150mm
(5.9")
148mm
(5.8")
Document length
MAX.600mm,23.6"
MIN.100mm,5.9"