Brother HL-1260 - Manual (Page 71)

IV - 23
1.31 DC Gear Holder Assy
(1) Remove the DC motor connector, then remove the paper delivery holder spring.
(2) Loosen the 4 screws and remove the DC gear unit from the body.
(3) Remove the paper delivery gear assy, the gears, the gear 48 spring, and the washer.
(4) Loosen the 3 screws and remove the DC motor assy from the gear holder.
Figure 4.61 Figure 4.60
Figure 4.58 Figure 4.59
1.32 PS Switch Wire, Remote Switch
(1) Pull out the PS switch wire from the remote switch and the switch attachment.
Lift slightly the wires when pulling them out. This is in order to release the chassis caught at 2
places.
(2) Remove the remote switch from the chassis.
Paper delivery
holder spring
DC gear unit
PS switch wire
Remote switch
Gear 48
Gear 48 spring
Gear 24/72
Gear 20/50
Gear 39
3 screws
DC gear holder assy
Gear 22/55
Gear 28
Connector
DC motor assy
Gear 21
Paper delivery gear assy
Washer
Remote switch
Remote switch
Chassis
4 screws
Switch attachment
PS switch wire