Brother HL-1260 - Manual (Page 329)

USER’S GUIDE
4–50
SECONDARY FONT SELECT FONT s Set the secondary font.
SYMBOL SET s Set the symbol set.
TABLE PRINT s Print the code table.
exit Exit
To select the font and symbol set in the HP LaserJet 4+ mode, follow these
steps:
1. Press the SEL switch to set the printer off-line.
2. Press the FONT switch.
The display shows the following menu.
PRIMARY FONT
3. Press the ▲ or ▼ switch to select the primary or secondary font setting
menu.
PRIMARY FONT
SECONDARY FONT
For this session, select the primary font setting menu.
4. Press the SET switch.
The display shows the font setting menu. You can skip the font setting
menu and advance to the symbol set setting menu with the ▲ or ▼
switch. For this session, go to the next step.
SELECT FONT p
✒ Note
The last lowercase letter “p” or “s” indicates the primary or secondary font
setting mode. If you select the secondary font setting mode, the display
shows “s” in the following messages.